Leotard!

UPDATE: Why is this post so popular?! This isn't even a flattering picture of me! UGH

Ignore my messy hair (I had to jump back in time since the camera was on a short timer) but there's the finished product! For this leotard, I used the spandex Lycra from Distinctive Fabrics and the Jalie pattern for the leotard. Overall, it looks really good! I made some alterations and have suggestions for future alterations.

Alterations I made:
I made the butt coverage a bit more and also lowered how high the cut was on the thigh. I wish I made more butt coverage and more hip coverage so I could wear underwear with my leotard. Also, I did not put elastic on the leg openings (I did on the neck opening and I highly recommend you do the same) because the fabric there already fit rather nicely; plus, I don't want the elastic to cut into my skin. The fabric also is rather unforgiving, so you don't want to make too many mistakes or sew it too much because it'll stretch a bit and start curling.

Future alterations:
More hip and butt coverage and to increase the size of the sleeves. The sleeves are a tad too tight for my liking, but not too bad. They actually just might stretch a bit with wear.

Spandex Lycra:
I only recommend you use this fabric if you're a seasoned sewer. If you have to use the seam ripper often when you sew, don't use this. It's hard to pick out the thread and when you do, you will sometimes pluck the fabric. Also, even if you don't pluck the fabric, it'll still leave holes. This fabric is also super stretchy and if you aren't used to sewing stretch fabrics, this will be very hard and you might end up with uneven seams and wavy edges.

This fabric does make a great leotard. I took it on its maiden voyage today in class and it held up well. It's stretchy, easy to put on, but it can also get a little warm. I would not recommend this for the unitard unless you want it to double as a warmer.


Next I will make a leotard out of the cotton Lycra. We'll see how it goes!

My leotard is done!!

My leotard is done!!! I just finished it. I made it out of the spandex Lycra first, even though it's probably the most difficult material. I will post pictures, advice about working with this fabric, and advice about using this pattern later once there's more light for pictures! (I was just too excited and had to post early!)

:D

Lycra find!

 I've been working busily today to complete my leotard prototype. And I must say, it looks rather good! There's no way I can wear this leotard to class since it doesn't have the full stretch both ways, but the pattern definitely works. It's easy once you figure out the directions. Now, I feel I'm ready to tackle to big task of sewing a leotard for class! I need to find a decent fabric. Since the fabric stores with brick and mortar branches have little variety, I decided to look around online again. I needed something that will give me a swatch AND had, preferably, a cotton/Lycra mix. Boy did I get lucky!

I found an amazing deal for a cotton-lycra blend!

Distinctive Fabrics

The cotton has everything the pattern requires: a two way stretch, 60" wide, comes in black, 85% cotton 15% Lycra, and only $7.50/yard. Plus, I can get a swatch!

Signing up for this company's registry will give you five free swatches. Needless to say, I took advantage of this offer. I ordered the cotton Lycra blend, plus another Lycra blend they offered, Lycra spandex. This will probably be too stretchy, but hey, it's worth a shot. Shipping is free, too. So check this site out!

Sweet!! I can't wait for it to come!

Leotard test run and skirt finished!

I've been working for a couple hours now on this leotard and skirt combo, using the new pattern. So far, so good! I ran into some issues around the skirt but I fixed most of them and it looks pretty good! Passable enough for me! The leotard is also pretty easy so far. It may be a little tight because it only has 70% stretch one way, but since I put that as the width of the pattern, it should be good enough to gauge if it'll fit me or not.

Even though I lowered the top of the leg, it still cuts very high. It'll easily be above my hip bone. I don't really feel comfortable with that, but luckily the skirt covers it.

 The skirt's looking good! It looks lopsided, but I can't figure out why it looks like that.... The more I look at it, though, the more I like how asymmetrical it is.

Anyway, that's it for my sewing today! Have a great weekend! Happy Friday everyone!

The pattern's here!

The pattern made it here! I'm so excited! I'm going to start working on it right away!

Here's a picture of it:

The pattern is bigger than most. It comes in two large sheets of paper. I'm going to be tracing over them so I don't have to cut it out. So far, it's really easy to make adjustments. They have right on the pattern where the waistline is so you can adjust as needed. Though depending on your size, there's not too much room you need to make adjustments. The differences between the sizes is small.

I'm a little worried about the instructions. I'm not used to them and the way they have everything labeled throws me off. I'll have to keep looking over them and I'll definitely try a trial leotard before trying on the more expensive spandex.

I'm already starting to make a pattern for a leotard! Today I went to the fabric store and asked the associates what they would recommend. They pointed me straight to spandex and, get this, even recommend bathing suit spandex for leotards. This is particularly good for the "crotch guard" as this pattern likes to call it. I bought a sample of it and will compare it to a couple others to tell you how I think. It's shiny (good or bad depending on the individual) and has the 70% stretch both ways that's needed. 

Pictures later once I cut out my trial! Meanwhile, class tomorrow and college tomorrow... I'm going to be a tired girl!